Brack Kit [Luxe]
$80.00 $135.00
Structural support kit for floating shower seats, suspended shelving/furniture, and more. It’s modular design can be combined to accommodate structures with longer spans. Kit contains two brackets and two sets of screws.
*Additional 2 3/4″ screws required if combining kits
100% Manufactured in Canada
- Time saving installation for floating bench/shelf
- Highest rated capacity vs. competitors (up to 350lbs per Brack-14)
- Modular application
- Combine kits as necessary [recommend 1 kit per 16” span – will vary by project]
- Additional 2 3/4″ inch screws are required if combining kits. This is not included with the purchase of this product and must be sourced outside of Fittes.
- Material – galvanized sheet metal with a long lasting powder coating (8 gauge)
- Recommended span between brackets is 16″ on centre. Depending on weight of finishing material and application, span can vary.
- Each bracket is rated to hold 350 lbs.
- Studs must be a minimum of 2″x4″
- Install is best done by a Pro
INSTALL GUIDE
INSTALL VIDEO
Frequently Asked Questions
Brackets must be mounted at the rough-in stage. You must have access to the studs inside the framed wall to properly mount.
The Brack Mount Kit [Luxe] is a structural support for any application where there is an engineered suspended structure. (ie. floating shower seat, shelves, vanity, etc.)
No – foam board is not structurally sound. You must use a structurally sound material (ie. 3/4″ plywood, aluminum honeycomb, solid wood, etc.)
No – you absolutely must waterproof prior to tiling.
No – a minimum 2×4 stud in required. 2×6, 2×8, studs are also compatible.
No – wood studs only.
Reviews
There are no reviews yet.